Science Models
Science Fair Projects

Published on Sep 16, 2023


The objective: The purpose of my project was to determine which fuel had the greatest energy density. I hypothesized that gasoline would have the greatest energy density because it is used commonly in many forms of transportation.


In my experiment I used a home-made calorimeter to measure the energy of combustion for paraffin wax, gasoline, vegetable oil, diesel, sterno, and wood. A calorimeter is a device used to determine the amount of energy given off during a chemical reaction by measuring the change in temperature of water surrounding a reaction crucible.

I recorded the starting temperature of the water and the mass of the fuel that I placed in the calorimeter. The fuel was lit and oxygen was circulated through the container. I sealed the crucible and placed it into a large bucket of water.

After twenty minutes I stopped the experiment and measured the change in temperature of the water and the change in mass of the fuel. With this information I calculated the total energy released and the energy density of each fuel


My experiment showed that paraffin wax had the greatest energy density of the six fuels I tested, while wood had the lowest energy density.


My conclusion did not support my hypothesis, although gasoline did have the second greatest energy density. This experiment shows that there is a significant difference between various fuels and suggests that in the future wax may become a more vital source of energy.

This project is about a calorimeter to determine the energy densities of six different fuels.

Science Fair Project done By Evan S. Stanford